Seagate ST3400071FC ユーザーズマニュアル
10
NL35 Series FC Product Manual, Rev. D
3.5.1
Programmable drive capacity
Using the Mode Select command, the drive can change its capacity to something less than maximum. See the
Mode Select Parameter List table in the FC Interface Product Manual. Refer to the Parameter list block
descriptor number of blocks field. A value of zero in the number of blocks field indicates that the drive shall not
change the capacity it is currently formatted to have. A number in the number of blocks field that is less than
the maximum number of LBAs changes the total drive capacity to the value in the block descriptor number of
blocks field. A value greater than the maximum number of LBAs is rounded down to the maximum capacity.
Mode Select Parameter List table in the FC Interface Product Manual. Refer to the Parameter list block
descriptor number of blocks field. A value of zero in the number of blocks field indicates that the drive shall not
change the capacity it is currently formatted to have. A number in the number of blocks field that is less than
the maximum number of LBAs changes the total drive capacity to the value in the block descriptor number of
blocks field. A value greater than the maximum number of LBAs is rounded down to the maximum capacity.
3.6
Factory-installed accessories
OEM standard drives are shipped with the NL35 Series FC Installation Guide (part number 100343674).
3.7
Factory-installed options
You may order the following items which are incorporated at the manufacturing facility during production or
packaged before shipping. Some of the options available are (not an exhaustive list of possible options):
packaged before shipping. Some of the options available are (not an exhaustive list of possible options):
• Other capacities can be ordered depending on sparing scheme and sector size requested.
• Single-unit shipping pack. The drive is normally shipped in bulk packaging to provide maximum protection
against transit damage. Units shipped individually require additional protection as provided by the single unit
shipping pack. Users planning single unit distribution should specify this option.
shipping pack. Users planning single unit distribution should specify this option.
• The NL35 Series FC Installation Guide, part number 100343674, is usually included with each standard
OEM drive shipped, but extra copies may be ordered.
• The Safety and Regulatory Agency Specifications, part number 75789512, is usually included with each
standard OEM drive shipped, but extra copies may be ordered.
3.8
User-installed accessories
The following accessories are available. All kits may be installed in the field.
• 4 Gbit Fibre Channel Kit, part number 100364396
This kit contains an interposer board which allows the FC connector on the drive to be split into its compo-
nent parts with one PS (5V, 12V) 4-pin Molex connector and 2 SFP (20-pin, 3.3V) data connectors. This
alows a standard PC power supply and 2 HBA data channels to be connected directly to the drive.
nent parts with one PS (5V, 12V) 4-pin Molex connector and 2 SFP (20-pin, 3.3V) data connectors. This
alows a standard PC power supply and 2 HBA data channels to be connected directly to the drive.
• Single-unit shipping pack.