Seagate ST336918N ユーザーズマニュアル
40
Barracuda 36ES2 Product Manual, Rev. B
8.1.1
Notes for Figures 14 through 18
[1]
Notes explaining the functions of the various jumpers on jumper header connectors J2, J5, and J6 are
given here and in Section 8.1.2. The term “default” means as standard OEM units are configured with a
jumper on those positions when shipped from factory. “Off” means no jumper is installed; “On” means a
jumper is installed. OFF or ON underlined is factory default condition.
given here and in Section 8.1.2. The term “default” means as standard OEM units are configured with a
jumper on those positions when shipped from factory. “Off” means no jumper is installed; “On” means a
jumper is installed. OFF or ON underlined is factory default condition.
The PCBA on LC models does not have connector J5. The J5 connector signals conform to SFF-8009
Revision 2.0, Unitized Connector for Cabled Drives, signal assignments for auxiliary connectors.
Revision 2.0, Unitized Connector for Cabled Drives, signal assignments for auxiliary connectors.
[2]
These signals are also on J1 I/O connector (J5, Pins 1-12). See Figure 12.
[3]
Voltage supplied by the drive.
[4]
Dashed area is optional host circuitry (external to the drive) connected to host supplied optional usage
plug.
plug.
[5]
Do not connect anything to J5 pins 9 and 12 or J6 pins 13-20.
[6]