Seagate ST336938LW ユーザーズマニュアル
Barracuda 36ES2 Product Manual, Rev. B
61
9.6.4
Mating connectors
Part numbers for the different type connectors that mate with the various Barracuda 36ES2 I/O connectors are
given in the sections following.
given in the sections following.
9.6.4.1
Mating connectors for N model drives
N model drives require a nonshielded cable with a 50-conductor connector consisting of two rows or 25 female
contacts with adjacent contacts 100 mils apart.
contacts with adjacent contacts 100 mils apart.
Recommended mating flat cable connector part numbers are:
The drive device connector is a nonshielded 50-conductor connector consisting of two rows of 25 male pins
with adjacent pins 100 mils apart. The connector is keyed (see Figure 18).
Mating panel mount connector: 3M-CHE-2050-J01A10-KLE.
with adjacent pins 100 mils apart. The connector is keyed (see Figure 18).
Mating panel mount connector: 3M-CHE-2050-J01A10-KLE.
Figure 18.
Nonshielded 50-pin SCSI device connector used on N drives
Closed end (for cable ends) [1]
3M-3425-7000
3M-3425-7050
Dupont-66900-290
3M-3425-7050
Dupont-66900-290
W/O strain Relief, No Center Key
With Strain Relief, No Center Key
With Strain Relief, With Center Key
With Strain Relief, No Center Key
With Strain Relief, With Center Key
Open end (In daisy-chain) [1]
3M-3425-6000
3M-3425-6050
Dupont-66900-250
3M-3425-6050
Dupont-66900-250
W/O strain Relief, No Center Key
With Strain Relief, No Center Key
With Strain Relief, With Center Key
With Strain Relief, No Center Key
With Strain Relief, With Center Key
!
!
!
"
"!
!
!!
!
"!
"!
"
#
#
"
!
$
%&
'( )
*
*