Seagate ST3450757FC ユーザーズマニュアル
46
Cheetah 15K.7 FC Product Manual, Rev. C
11.3
Cooling
The host enclosure must dissipate heat from the drive. You should confirm that the host enclosure is designed
to ensure that the drive operates within the temperature measurement guidelines described in Section 7.4.1. In
some cases, forced airflow may be required to keep temperatures at or below the temperatures specified in
Section 7.4.1.
to ensure that the drive operates within the temperature measurement guidelines described in Section 7.4.1. In
some cases, forced airflow may be required to keep temperatures at or below the temperatures specified in
Section 7.4.1.
If forced air is necessary, possible air-flow patterns are shown in Figure 11. The air-flow patterns are created by
fans either forcing or drawing air as shown in the illustrations. Conduction, convection, or other forced air-flow
patterns are acceptable as long as the temperature measurement guidelines of Section 7.4.1 are met.
fans either forcing or drawing air as shown in the illustrations. Conduction, convection, or other forced air-flow
patterns are acceptable as long as the temperature measurement guidelines of Section 7.4.1 are met.
Figure 11. Air flow
Above unit
Under unit
Note. Air flows in the direction shown (back to front)
or in reverse direction (front to back)
or in reverse direction (front to back)
Above unit
Under unit
Note. Air flows in the direction shown or
in reverse direction (side to side)
in reverse direction (side to side)