Seagate ST34502LW/LC ユーザーズマニュアル
Cheetah 9LP Installation Guide, Rev. B
41
LW drives
Terminating the drive
ST39102LW and ST34502LW drives do not have internal termi-
nators or any other way of adding internal termination to the
drive. You must provide external termination to these drives
when termination is required. This is normally done by adding an
in-line terminator on the cable.
nators or any other way of adding internal termination to the
drive. You must provide external termination to these drives
when termination is required. This is normally done by adding an
in-line terminator on the cable.
Note. Use active (ANSI SCSI-2 Alternative 2) single-ended ter-
minators when terminating a bus operating in single-
ended mode. Use SPI-2-compliant active low voltage dif-
ferential terminators when terminating a SCSI Ultra2 bus
operating in LVD mode.
ended mode. Use SPI-2-compliant active low voltage dif-
ferential terminators when terminating a SCSI Ultra2 bus
operating in LVD mode.