Seagate ST31055N/W/WC ユーザーズマニュアル
Hawk 2XL Family Installation Guide, Rev. C 35
_______________________________________________________________________________________________________________________
Formatting
Caution.
Do not format the existing drive that contains user data that
you don't want to lose, as all user data will be lost when a drive
is formatted.
you don't want to lose, as all user data will be lost when a drive
is formatted.
When a second drive is installed, the drive letters assigned by
DOS to the first drive may change. Be careful not to accidently
format a logical drive with existing data.
DOS to the first drive may change. Be careful not to accidently
format a logical drive with existing data.
When you complete drive partitioning, you need to high-level
format every new logical drive you have set up. If your new
drive is to be the boot-up drive, insert the DOS system diskette
in drive A and type at the A/> prompt FORMAT C: /s/v. This
formats drive C and puts the programs on that are necessary
to boot the computer from the C drive, and verifies that the
format was performed correctly. For each additional logical drive
you have changed or newly set up, type in FORMAT X: /v (where
"X" is the proper drive letter for the drive to be formatted).
format every new logical drive you have set up. If your new
drive is to be the boot-up drive, insert the DOS system diskette
in drive A and type at the A/> prompt FORMAT C: /s/v. This
formats drive C and puts the programs on that are necessary
to boot the computer from the C drive, and verifies that the
format was performed correctly. For each additional logical drive
you have changed or newly set up, type in FORMAT X: /v (where
"X" is the proper drive letter for the drive to be formatted).