Seagate 1200 SSD ユーザーズマニュアル
S
EAGATE
1200 SSD P
RODUCT
M
ANUAL
, R
EV
. A
9
3.8.4
FORMAT UNIT command
A device which supports Thin Provisioning will be capable of performing a SCSI FORMAT UNIT command which allocates
Logical Blocks Addresses that are not linked to Physical Block Locations. A FORMAT command will cause all LBAs to
become unmapped.
Logical Blocks Addresses that are not linked to Physical Block Locations. A FORMAT command will cause all LBAs to
become unmapped.
3.8.5
Protection Information (PI) and Security (SED)
The requirements in this section apply to any device which supports LBA unmapping.
In SCSI devices, umapped LBAs are defined as part of the Thin Provisioning model. Support of the Thin Provisioning model
is indicated by the LBPME bit having a value of '1' in the READ CAPACITY (16) parameter data.
is indicated by the LBPME bit having a value of '1' in the READ CAPACITY (16) parameter data.
When a region of LBA's are erased via cryptographic erase, as part of the erase, the drive shall unmap those LBAs.
If the host attempts to access an unmapped or trimmed LBA, the drive shall return scrambled data. For a given LBA, the data
shall be identical from access to access, until that LBA is either updated with actual data from the host or that LBA is
cryptographically erased. The drive shall report a value of '0' in the LBPRZ field returned in the READ CAPACITY (16)
parameter data.
shall be identical from access to access, until that LBA is either updated with actual data from the host or that LBA is
cryptographically erased. The drive shall report a value of '0' in the LBPRZ field returned in the READ CAPACITY (16)
parameter data.
If the host attempts to access an unmapped LBA on a drive that has been formatted with Protection Information (PI), the
drive shall return scrambled PI data for that LBA. Depending on the value of the RDPROTECT field in the data-access
command CDB, this may result in the drive returning a standard PI error to the host.
drive shall return scrambled PI data for that LBA. Depending on the value of the RDPROTECT field in the data-access
command CDB, this may result in the drive returning a standard PI error to the host.
If the host reduces the addressable capacity of the drive via a MODE SELECT command, the drive shall unmap or trim any
LBA within the inaccessible region of the device.
LBA within the inaccessible region of the device.
Additionally, an UNMAP command is not permitted on a locked band.
D
RIVE
C
ONFIGURATION
Standard
SED
PI Setting
Disabled
Enabled
Disabled
Enabled
PROT_EN bit
0
1
0
1
LBPME bit
1
1
1
1
LBPRZ bit
1
1
0
0
PI Check Requested
N/A
Yes
No
N/A
Yes
No
DATA Returned for
Thin Provisioned LBA
Thin Provisioned LBA
0x00
0x00
0x00
Random
None
Random
PI Returned for
Thin Provisioned LBA
Thin Provisioned LBA
None
0xFF
0xFF
None
None
Scrambled
PI data
PI data
PI Check Performed
N/A
No
No
N/A
Yes
No
Error reported to Host
No
No
No
No
Yes
No