Seagate ST3450657SS ユーザーズマニュアル

30

Cheetah 15K.7 SAS Product Manual, Rev. D

b. Non-operating

–40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 86°F (30°C) per hour. This 
specification assumes that the drive is packaged in the shipping container designed by Seagate for use with 
drive.      

The values below assume that no condensation on the drive occurs.

a. Operating

5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour.

b. Non-operating

5% to 95% non-condensing relative humidity.

a. Operating

–1,000 to +10,000 feet (–305 to +3,048 meters)

b. Non-operating

–1,000 to +40,000 feet (–305 to +12,210 meters)

Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive is 
installed in an enclosure to which the stated shock and/or vibration criteria is applied, resonances may occur 
internally to the enclosure resulting in drive movement in excess of the stated limits. If this situation is apparent, 
it may be necessary to modify the enclosure to minimize drive movement.

The limits of shock and vibration defined within this document are specified with the drive mounted by any of 
the four methods shown in Figure 8, and in accordance with the restrictions of Section 11.3.

a. Operating—normal

The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock not 
exceeding:

• 15 Gs at a duration of 11 msec (half sinewave)

• 20 Gs at a duration of 2 msec (half sinewave)

• 60 Gs at a duration of 2 msec (half sinewave) when performing reads only

HDA Temp.

Check Point

.5"

1.0"