Manhattan Computer Products 179133 ユーザーズマニュアル

FCC 

This equipment has been tested and found to comply with FCC rules 

Part 15, Subpart B § 15.109/15.107 Class B. operation is subject to 

the following two conditions: 

•   This device may not cause harmful interference; and
•   This device must accept any interference received, including 

  interference that may cause undesired operation. 
CE 

This equipment is in compliance with the requirements of the following 

regulations: eN 55022 Class B (2006); eN 55024 (1998+A1:2001+ 

A2:2003); IeC/eN 61000-3-2 (2006); IeC/eN 61000-3-3 (1995+A1 

:2001+A2 :2005); (IeC/eN 61000-4-2 (1995+A1 :1998+A2 :2001)/-3 

(2006)/-4(2004)/-5(2006)/-6 (1996+A1 :2001)/-11 (2004) 

This equipment is in compliance with the requirements of the following 

regulations: eN 55022 (2006); AS/N�S CISPR22 �� IeC: 2005.

eN 55022 (2006); AS/N�S CISPR22 �� IeC: 2005.

This equipment is in compliance with the requirements of the following 

regulation: CISPR22 �� IeC: 2005.

•   Unplug any USB 2.0 VGA adapter connected to your PC or notebook 

  computer before executing the Hi-Speed USB 2.0 dVI Converter    

  setup or un-installation program. 

•   An AC power adapter is required for an external USB hub. The driver  

  allows up to six Hi-Speed USB 2.0 dVI Converters on one PC. 

•   Connect the display device to the dVI connector of the Hi-Speed 

  USB 2.0 dVI Converter and switch the display device on before 

  plugging the converter into an available USB 2.0 port of the PC or 

  notebook computer. 

•   do not reboot the computer until all USB 2.0 dVI Converters are 

  installed.

3

INTRODUCTION