Creative Dxr2 ユーザーズマニュアル

English

Primary IDE Connector 
with Hard Disk Drive

1.

Back up the files on your hard disk drive before you proceed.

2.

Set the jumpers on the PC-DVD drive and the hard disk drive (see page 2).  Set the hard disk drive 
to master; set the PC-DVD drive to slave.

3.

Connect the power cable and IDE data cable to your hard disk drive.

4.

Connect the PC-DVD audio cable to the Dxr2 decoder card’s Audio In connector (see figure on 
page 3).

5.

Slide the drives back into place and secure them to the computer (screws are provided for the PC-
DVD drive).

6.

Proceed to “Step 5: Connect Other Devices to the Dxr2.”

PC-DVD drive
(slave)

Hard disk drive
(master)

PC-DVD 
audio cable

Power 
cable

Power 
cable

IDE data cable

Colored 
stripe

Pin 1

Note:  Align the colored 
stripe of the IDE data cable 
to pin 1 of the hard disk 
drive’s data connector.

Dvd-fm.book  Page 11  Thursday, December 17, 1998  9:44 AM