Fujitsu MAC3045 ユーザーズマニュアル
C141-E035-03EN
2 - 7
2.2
SCSI Function Specifications
Table 2.3 shows the SCSI functions provided with the IDD.
See Appendix E for the SCSI interface functions provided for the IDD. Refer to the OEM
Manual –SCSI Physical Specifications–, for details or specifications.
Manual –SCSI Physical Specifications–, for details or specifications.
Table 2.3
SCSI function specifications
Item
Specification
Single-ended type
Ο
Differential type
×
Single-ended type
Position where the terminating
resistor is mounted on the PCA
resistor is mounted on the PCA
Ο
Differential type
Position where the terminating
resistor is mounted on the PCA
resistor is mounted on the PCA
×
TERMPWR signal send/receive function
Ο
Non-shielded type (50 mil pitch): 16-bit SCSI
Ο
Shielded type
×
Data bus parity
Ο
Bus arbitration function
Ο
Disconnection/reconnection function
Ο
SCSI ID 8-bit SCSI
16-bit SCSI
#0 to #7
(Jumper selection)
#0 to #15
(Jumper selection)
LUN (logical unit number)
#0 fixed
Asynchronous mode 8-bit SCSI
16-bit SCSI
16-bit SCSI
Ο
6 MB/s max.
Ο
12 MB/s max.
Synchronous mode 8-bit SCSI
16-bit SCSI
16-bit SCSI
Ο
20 MB/s max.
Ο
40 MB/s max.
Data buffer
512-KB programmable segment
buffer (1 to 16)
Data block length (Logical data length=Physical data length)
512 to 528 bytes
(Fixed length)
Ο
: Provided
×
: Not provided
Data transfer
Addressing
Connector
Electrical
requirements
requirements