Toshiba MK4006GAH ユーザーズマニュアル
![Toshiba](https://files.manualsbrain.com/attachments/acaaaa9cc6b763ccfc72ced2ae95d9c94b8b8632/common/fit/150/50/8adbcbcd45c75dc53932fc9caf6f2740daed52d836b76efbd0162ac2599f/brand_logo.png)
Toshiba Corporation Digital Media Network Company
Page 27 of 153
© 2003, Copyright TOSHIBA Corporation All Rights Reserved
10.6 Load/Unload
Be sure to issue and complete the following commands for unloading before cutting off the power
supply.
supply.
Following table shows the specification for normal load/unload cycles.
Load/unload cycle (Times)
Environment
600,000 Room
temperature
300,000
Operational temperature range
Unload is executed by the following commands :
・
Standby
・
Standby Immediate
・
Sleep
・
Hard reset
Load/Unload is also executed as one of the idle modes of the drive.
If the power supply is cut when the head is on a media, Emergency Unload is performed by routing
the back-EMF of SPM to the voice coil. In this case, Emergency Unload is performed 20,000 times
maximum. Emergency Unload should be used only when the host-system cannot perform normal
operation.
the back-EMF of SPM to the voice coil. In this case, Emergency Unload is performed 20,000 times
maximum. Emergency Unload should be used only when the host-system cannot perform normal
operation.