Accton Technology 4508 ユーザーズマニュアル
Management Guide
1-3
Telnet Connection
Prior to accessing the switch via an in-band Telnet connection, you must first
configure it with a valid IP address, subnet mask, and default gateway using an
out-of-band connection or BOOTP protocol. After configuring the switch’s IP
parameters, you can access the on-board configuration program from anywhere
within the attached network.
configure it with a valid IP address, subnet mask, and default gateway using an
out-of-band connection or BOOTP protocol. After configuring the switch’s IP
parameters, you can access the on-board configuration program from anywhere
within the attached network.
Note: Up to four Telnet sessions are supported.
In-Band Network Connection
The on-board configuration program can be accessed using Telnet or a Web
browser (Internet Explorer 4.0 or above, or Netscape Navigator 4.0 or above)
from any computer attached to the network. It can also be managed from a
network computer using management software such as AccView.
browser (Internet Explorer 4.0 or above, or Netscape Navigator 4.0 or above)
from any computer attached to the network. It can also be managed from a
network computer using management software such as AccView.
Notes: 1. Prior to accessing the switch via a direct network connection, first
configure it with a valid IP address, subnet mask, and default gateway
using an out-of-band connection or BOOTP protocol.
using an out-of-band connection or BOOTP protocol.
2. The on-board program only provides access to basic configuration
functions. To access the full range of SNMP management functions, you
must use SNMP-based network management software. Accton provides a
Windows-based SNMP software package called AccView/Open. If you
require this software, please contact your Accton distributor. Also note
that AccView’s CheetahSwitch Manager module can be easily integrated
into most third-party management platforms.
must use SNMP-based network management software. Accton provides a
Windows-based SNMP software package called AccView/Open. If you
require this software, please contact your Accton distributor. Also note
that AccView’s CheetahSwitch Manager module can be easily integrated
into most third-party management platforms.