Accton Technology 4508 ユーザーズマニュアル

Port Information

Displays operational status, including link state, flow control method,
speed and duplex mode.

Spanning Tree Configuration Enables Spanning Tree Algorithm; also sets parameters for hello time,

maximum message age, switch priority, and forward delay; as well as
port priority, path cost and Fast STA mode.

Spanning Tree Information

Displays full listing of parameters for the Spanning Tree Algorithm.

Mirror Port Configuration

Sets the source and target ports for mirroring.

IGMP Configuration

Configures IGMP multicast filtering.

Broadcast Storm Control

Sets the broadcast-rate threshold at which broadcast packets are
discarded.

Extended Bridge Configuration Displays/configures extended bridge capabilities provided by this

switch.

802.1P Configuration

Configures default port priorities and queue assignments.

802.1Q VLAN Base

Displays basic VLAN information, such as VLAN version number,

  Information

maximum VLAN ID, maximum VLANs supported, and the current
number of VLANs configured.

802.1Q VLAN Current

Displays VLAN groups and port members.

Table Information
802.1Q VLAN Static

Configures VLAN groups via static assignments, including setting port

Table Configuration

members, or restricting ports from being dynamically added to a port
by the GVRP protocol.

802.1Q VLAN

Displays/configures port-specific VLAN settings, including PVID,

Port Configuration

ingress filtering, and GVRP.

Port Statistics

Displays statistics on network traffic passing through the selected port.

RMON Statistics

Displays detailed statistical information for the selected port such as
packet type and frame size counters.

Unicast Address Table

Provides full address listing, as well as search and clear functions.

IP Multicast Registration Table Displays all the multicast groups active on this switch, including

multicast IP addresses and corresponding VLAN IDs.

Static Unicast Address Table Used to manually configure host MAC addresses in the unicast table.
Configuration

System Restart

Restarts system with options to use POST, or to retain factory defaults,
IP settings, or user authentication settings.

Exit

Exits the configuration program.