Netgear WMS105-10000S ユーザーズマニュアル

Advanced Wireless Settings

This page is for advanced users who wish to control the WLAN settings of the access points 
manually. On the Configuration tab, select Wireless > Advanced. 

Disable the Central RF Management feature from the Basic > RF Management page. 

This prevents the Wireless Management Software from automatically using RF 
management and adjusting power and channel settings for the access point group.

Click Apply so that your changes take effect.

Turn Radio On

Disable this option to disable wireless access for the selected mode. 
To disable all wireless access through this access point, you must 
turn off the 802.11b/g/n, as well as the 802.11a/n radios.

Wireless Mode

Specify the wireless mode for the access points. Access points use 
the mode enabled for the group, unless the access point does not 
support the group setting. In that case, the access point uses the 
mode providing highest performance.
• The default setting is 802.11ng mode.
• If you specify 802.11b or 802.11bg mode, both 802.11n- and 

802.11g-compliant devices can be used with this access point. 
However, 802.11b devices will not be able to connect. 

• If you select this option and other settings on this screen are 

disabled, then you must select the Turn Radio On radio button to 
enable available options on this screen.

Data Rate

Select the available transmit data rates of the wireless network.