Netgear WMS105-10000S ユーザーズマニュアル

Access Point Status Details

From the Access Point Status screen, 
click the Details button to view this 
page.

You can use the Refresh button to 
update statistics and information.

The Access Point Status screen shows 
configuration settings, current wireless 
settings, current clients and current 
traffic statistics.

Access Point Name: The access 

point’s NetBIOS name.

Model: The managed access 

point’s model.

Group: The configured group of 

managed access point.

IP Address: The IP Address of 

managed access point.

Ethernet MAC Address: The Ethernet MAC address of managed access point.

2.4 GHz Channel: 2.4 GHz channel configured on access point; set to -NA- if not 

available.

5 GHz Channel: 5 GHz channel configured on access point; set to -NA- if not available.

Load Balancing: Load balancing enable/disable status for access point.

The section displays configured and enabled security profiles on the access point.

Type: 802.11 b/bg/ng or 802.11 a/na mode for security profile.

SSID: Wireless Network SSID.

Security: The mode of security configured for the profile.

VLAN: VLAN configured for the security profile.

This section displays access point client station information.

MAC: Wireless MAC of the access point client.

SSID: Wireless SSID configured on the managed access point to which the client 

connects.

Channel: The channel which client is using to connect.

Mode: The mode (802.11 b/bg/ng or 802.11 a/na) for the security profile.

Auth: The authentication mode (open, WEP, WPA, or WPA2) of security.