Gigabyte GA-8GEM667 ユーザーズマニュアル

- 18 -

GA-8GEM667 Series Motherboard

Ø

Important Notice:

Please connect first harddisk to IDE1 and

connect CDROM to IDE2.

The red stripe of the ribbon cable must be

the same side with the Pin1.

Ø

Please connect the floppy drive ribbon cables

to FDD. It supports 360K,1.2M, 720K, 1.44M

and 2.88M bytes floppy disk types.

The red stripe of the ribbon cable must be the

same side with the Pin1.

1

Ø

PWR_LED is connect with the system power

indicator to indicate whether the system is

on/off. It will blink when the system enters

suspend mode.

If you use dual color LED, power LED will turn

to another color.

1

IDE1

IDE2

1

MPD+

MPD-

MPD-

Ø

When an AGP 2X (3.3V) card is installed the

2X_DET will light up, indicating a non-

supported graphics card is inserted. Informing

users that system might not boot up normally

due to AGP 2X (3.3V) is not supported by the

chipset.

+-