AMCC 720-0138-00 ユーザーズマニュアル

Starting 3DM and Logging In

19

5

If the process is still running, contact AMCC/3ware Technical Support for 
assistance.

1

Open a Terminal window and type:

sudo /usr/sbin/3dm2

2

Enter your administrator password, when prompted for it.

The 3DM process starts.

3

Open your browser and enter the URL for your system. 

The default URL is https://localhost:888/

You can also replace “localhost” with the IP address of the computer that 
contains the 3ware controller. For example: https://<IP address>:888/

Viewing 3DM Remotely Using a Web Browser

When remote administration is enabled on the 3DM 2 Settings page, you can 
use 3DM to check status and administer your 3ware RAID controller from a 
browser on any computer, over an internet connection.

You do not need to install the 3DM software on the remote computer.

In the address line of your browser, enter the URL or IP of the system 
containing the 3ware RAID controller. 

If you do not know the URL or IP for the system, you can contact your 
network administrator. Or open a Terminal window and type 

ifconfig

.

 

When using 3DM to access a remote system, the time on the 

local system must match the time on the file server. If the time varies 
by more than 30 minutes, it will not be possible to remotely monitor 
the system (you will not be able to log in). If you are in a different time 
zone, you must first change the time of the local system to match the 
time of the remote system.