Fujitsu A22W-3 ユーザーズマニュアル

SCENICVIEW A20W-3/A22W-3 

 

To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to 
replace the original cable set. 
● 

The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements. 

● 

The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the 
outer sheath. 

● 

For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used. 
For devices which sit on the floor, only SJT type cable sets may be used. 

● 

The cable set must be selected according to the rated current for your device. 

● 

If necessary, replace the original power cable with a regular grounded 3-core mains lead. 

● 

Transport the monitor with care and only in its original packaging or another corresponding 
packaging fit to protect it against knocks and jolts. 

● 

Never drop the LCD monitor (danger of glass breakage). 

● 

Always pull out the power plug before you clean the monitor. 

● 

Do not clean any interior parts yourself, leave this job to a service technician. 

● 

Do not use any cleaning agents that contain abrasives or may corrode plastic. 

● 

Ensure that no liquid will run into the system. 

● 

Ensure that the ventilation areas of the monitor are free. 

● 

The display surface of the LCD monitor is sensitive to pressure and scratches. Clean it only 
using a soft, slightly moistened cloth. 

Wipe the monitor casing with a dry cloth. If the monitor is particularly dirty, use a cloth which has 
been moistened in mild domestic detergent and then carefully wrung out. 

The shipped version of this device complies with the requirements of the EU directives 
2004/108/EU "Electromagnetic compatibility" and 2006/95/EU "Low voltage directive". 

 

 

4 

A26361-K1177-Z120-1-7619, edition 1