Fujitsu A22W-3 ユーザーズマニュアル
SCENICVIEW
A20W-3/A22W-3
Connecting the monitor
!
Please take note of the safety information in the "Important notes" chapter.
CE conformance and optimum picture quality are guaranteed only if you use the data
cables supplied.
Do not cover the ventilation openings of the monitor.
The computer power plug must be pulled out!
CE conformance and optimum picture quality are guaranteed only if you use the data
cables supplied.
Do not cover the ventilation openings of the monitor.
The computer power plug must be pulled out!
►
Be sure that the monitor and the computer are switched off.
Connecting cables to the monitor
1 = Power connector
2 = D-SUB connection socket (ANALOG)
3 = AUDIO-IN connector
4 = Security slot for "Kensington Lock"
2 = D-SUB connection socket (ANALOG)
3 = AUDIO-IN connector
4 = Security slot for "Kensington Lock"
The data cable supplied has two 15-pin D-SUB connectors for connection to the monitor and to the
computer.
►
computer.
►
Select the suitable data cable for your computer.
Graphics card with VGA interface:
Graphics card with VGA interface:
D-SUB connector
Information on the computer connections and interfaces is contained in the operating manual
for your computer.
for your computer.
►
Connect one of the connectors of the data cable to the D-SUB connector (2) on the monitor
and secure the plug-in connection by tightening the safety screws.
and secure the plug-in connection by tightening the safety screws.
The monitor automatically detects the input when only one signal source is connected.
i
►
Insert one plug of the audio line in the AUDIO IN (3) socket on the monitor and make sure it is
properly engaged.
properly engaged.
►
Plug the power cable supplied into the power connector (1) of the monitor.
A26361-K1177-Z120-1-7619, edition 1
11