Fujitsu P37FT05AEB ユーザーズマニュアル

日 本 語

中文

a

 or 

b

 to select the channel and press 

1

 (Fav), 

2

 (Lock), 

3

 (Delete) on the remote control.

The password input screen is displayed.
When this screen is displayed, input the password. (Opera-
tion is different depending on the Password mode setting.)

* The factory set password is “0000”.

Press 

Z

 to store.

1: Fav (Favourite)

Your favourite channels can be registered.
When registered, it can be easily changed into your 
favourite channel by using  

|

 .

2: Lock (Channel Lock)

Channel Lock can be set.
When a channel with “Channel Lock” set was selected, it 
cannot be watched if a password is not entered.

3: Delete

Clears the channels acquired by Auto Scan so they cannot 
be watched.

* Once deleted, a channel cannot be recovered without 

performing the Auto Scan or Carrier Setup Rescan 
operation.

* When Auto Scan is performed, the registered information 

such as Fav or Lock may be lost.

Switch the order of the displayed channels.

The order of the channels can be changed as follows:
• Use 

a

 or 

b

 to select the channels.

• Press 

4

 (Sort).

• Use 

a

 or 

b

 to move to the position you want to 

insert selected Channel Name.

• Press 

Z

 to store.

* The Sort menu may not be displayed depending on the 

broadcast station.

Switch the TV and Radio list display.

5

 When (TV/Radio) is pressed, TV channel list and 

Radio channel list are switched.

 

* Each time the Auto Scan, Manual Scan and Carrier 

Setup setting screen is entered, the Password input 
screen is displayed. After this screen is displayed, enter 
the password. (Operation is different depending on the 
Password mode setting.) (See P. E-42.)

* The factory set password is “0000”.

Automatically sets the receiving channel.

Press 

c

 or 

d

 to select the country name.

 < United Kingdom < France < Germany < Italy <

Spain <

Press 

Z

 to start Auto Scan.

The Channel and Frequency can each be set, and a specific 
Channel and Frequency can be scanned.

* The Signal Quality of each can be checked.

Delete and Rescan can be performed for each Carrier.

i

 (Delete): Deletes the Carrier from the list.

j

 (Rescan): Automatically reacquires Carrier.

“CHANNEL MANAGER” selection screen

“SYSTEM INSTALLATION” selection screen

NOTE -Lock (Channel Lock)

• When an operation other than the specified operation is performed while the Password input screen was displayed, the screen may become blank or 

“Locked Service” screen may be displayed. In this case, press 

M

 or 

N

 and reset to the channel you want to watch.

7701_01_E.book  41 ページ  ２００７年３月２２日　木曜日　午後２時３８分