Fujitsu P37FT05AEB ユーザーズマニュアル
E-5
Engli
sh
INSTALLATION
To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.
Be sure to use the Fujitsu General Limited’s optional stand, wall-mounting unit or the other mounting unit when installing the display. Also, be
sure that your dealer performs the installation.
sure that your dealer performs the installation.
See the appropriate instruction manual for additional information on the mounting hardware you select.
To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into the position as described below.
Use the diagram below to determine how much space is needed to ensure proper heat radiation. This is a minimum space requirement;
therefore, provide at least as much space as indicated below.
therefore, provide at least as much space as indicated below.
* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C (between 32°F and
104°F)
* Never attempt to tilt the display sideways or backward.
* To prevent the power cord and other cables from being accidentally pulled, make sure that they run along the wall or through corners.
* To prevent accidents and ensure safety in the event of an earthquake, secure the display to prevent it from tipping over.
* To prevent the power cord and other cables from being accidentally pulled, make sure that they run along the wall or through corners.
* To prevent accidents and ensure safety in the event of an earthquake, secure the display to prevent it from tipping over.
* When placing with the display surface down, lay the body on a flat surface covered with a thick towel, etc. so as not to scratch the
display surface. Also be careful that the display does not tip over. Don’t place with the back facing down, because there are projections
on the back. (For 65” model)
on the back. (For 65” model)
Display Section
Note
• The external view is meant to be a representation of the actual unit and is not to scale; therefore, it may differ from the actual shape and size of the product.
• Due to the fragile and highly precise equipment, it is very important to pack properly before transportation using only the packing materials provided.
• Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these supporting products.
• Due to the fragile and highly precise equipment, it is very important to pack properly before transportation using only the packing materials provided.
• Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these supporting products.
Reference
The speakers and stand of the 65” model are optional.
• See P. E-44 for more information on options.
• See P. E-44 for more information on options.
Upper
Right
Lower
Left
Front
Side
Wall
Upper
Right
Lower
Left
Wall
37” model
65” model
7701_01_E.book 5 ページ ２００７年３月２２日 木曜日 午後２時３８分