Epson V4.22 ユーザーズマニュアル

Registering and deleting projectors for monitoring

Registration by specifying an IP address (Manual
registration)

PROCEDURE

Right-click in "Grouping view" and select "New" -
"Projector (manual registration)".

The following window will be displayed.

• If "Detail list view" is displayed, select "New" - "Projector (manual

registration)" from the "Edit" menu.

Enter the IP address of the projector to be registered
in the "IP address" box and then click [Search]. When
the message is displayed, click [OK].

• If using a serial

⇔ TCP/IP conversion adapter and cable to connect

the projector, select "Use Serial

⇔ TCP/IP conversion adaptor".

Enter the port number in "Port Number" and then click [Search].

After searching is complete, enter the information for
the projector to be registered while referring to the
table below.

TIP

You can also carry out this operation by selecting "Projector (manual
registration)" from "New" in the "Edit" menu.

Display name

Enter the name of the projector(s) to be displayed in
"Grouping view" or "Detail list view".
Up to a maximum of 32 bytes can be entered.
A space cannot be used as the first character.

Display icon

Select the icon(s) to be displayed in "Grouping view"
or "Detail list view".

Parent group

Select when registering a projector in a group.
If no groups have been created, this cannot be
selected. s"Registering several projectors to a
monitoring group all at once"

p.13

Projector
name

This shows the name that has been registered on the
projector.

IP address

This shows the IP address that you entered in step 2.

Use Serial

⇔

TCP/IP
conversion
adaptor.

Select this if using a serial

⇔ TCP/IP conversion

adapter to connect the projector.

Port Number

If using a serial

⇔ TCP/IP conversion adapter to

connect the projector, enter the port number.