Fujitsu P19-3 ユーザーズマニュアル

SCENICVIEW B17-3/B19-3/P19-3  

 

The corresponding setting window (here: Image Adjust) is displayed (on the right-hand side). 

The first function (H-Position) is highlighted. 
► 

If necessary, press the 

6

 or 

5

 button to 

mark another function. 

► 

Press the SELECT/MENU button to select 
the highlighted function. 

► Press 

the 

6

 or 

5

 button to adjust the 

value for the selected function. 

► 

Press the EXIT/AUTO button to exit the 
function. 

► 

If necessary, press the button 

6

 or 

5

 to 

mark another function or press the 
EXIT/AUTO button to return to the main 
menu. 

All changes are stored automatically. 
If you want to change other settings, select the corresponding function from the OSD main menu. All 
possible adjustments of the main menu are described in the following. 

 

The OSD menu for analogue monitor operation is described in the following. During digital 
operation some functions are not available, as they are not required due to the digital 
transmission technology used.  

 

 

 

Calling the Brightness / Contrast setting window 

Brightness 

Setting the brightness of the display 
With this function you change the brightness of the background lighting. 

Contrast 

Setting the contrast of the display 
With this function you modify the contrast of bright colour tones. 

Black Level 

Setting the brightness of the display 
With this function you modify the contrast of dark colour tones. 

Auto Level 

Setting the brightness of the display 
With this function you can automatically set the contrast. 
Press the SELECT/MENU button to activate the function. 

 

If the contrast is set too high, bright surfaces can no longer be distinguished from very 
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved. 

 

20 

A26361-K1143-Z120-1-7619, edition 3