Fujitsu P65FT00AEB ユーザーズマニュアル
E-18
BASIC OPERATIONS
1
Press
/I to the ON
state.
The power lamp lights up. (See P. E-7.)
2
Press
.
The power is turned on, and the power lamp changes
from “Red” to “Green.”
from “Red” to “Green.”
Select the Video, RGB, or TV mode to
enable ordinary operation.
enable ordinary operation.
1
Press
when the power is “ON”.
The power lamp changes from “Green” to “Red” and
the display becomes the standby state.
the display becomes the standby state.
Press
O
to increase the volume.
Press
P
to reduce the volume.
* Note that the volume level remains stored even when
you turn OFF the power.
* Volume menu will not be displayed when “No Audio”
is selected. (See P. E-36.)
* An audio signal from an audio output terminal
(AUDIO OUTPUT DIGITAL or AUDIO OUTPUT
ANALOG) does not change.
ANALOG) does not change.
Press
K
.
The audio is removed.
Press again to restore the audio to the original level.
The mute mode can also be released by pressing
O
or
P
.
* An audio signal from an audio output terminal
(AUDIO OUTPUT DIGITAL or AUDIO OUTPUT
ANALOG) does not change.
ANALOG) does not change.
Power ON
Power OFF (Standby State)
VOL (Volume)
MUTE
When the volume adjustment button is
pressed
pressed
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Some functions are not available depending on the state or condition of use.
• Some functions are not available depending on the state or condition of use.
7701_01_E.book 18 ページ ２００７年３月２２日 木曜日 午後２時３８分