Fujitsu P65FT00AEB ユーザーズマニュアル

When the NIGHT mode is used when watching TV, 
even low volume sounds can be heard clearly. This 
function is convenient when watching TV at night.

,

Each time this button is pressed, the setting changes as 
follows.

$

Normal$Night$

[Normal]: Normal sound.
[Night]: Volume is lowered without changing the 

sound quality. The volume of sudden loud 
sounds, etc. is also suppressed.

Q

Press this button to display the Program No., input 
mode, and screen size status.

U

This can be used to set the time before the power is 
turned off (Stand-by state). Each time this button is 
pressed, the setting changes as follows.

$

Off$30min.$60min.$90min.$

120min.$

R

This button can be used to switch the picture mode.
In the picture mode, you can switch between the set 
status and the “Fine” mode.
*  For the picture mode settings, see “Picture Mode 

* While you are watching pictures in Fine mode, 

pressing the button does not switch the mode.

S

This button can be used to recall the settings of the 
picture memories 1 – 8. Each time this button is 
pressed, the setting changes as follows.

$

Memory1$Memory2$Memory3$

Memory4$Memory5$Memory6$
Memory7 $Memory8$

*  For the picture memory settings, see “Picture 

Memory (P. E-31)”.

This function switches among available picture display 
modes.

!

The currently selected mode will appear.

!

Each time you press 

!

, a different Screen Size 

appears.  The sequences used are as follows:

・

Video mode (SD signal)

$

Normal$Wide1$Wide2$Zoom1

$

 Zoom2$

・

Video mode (HD signal)

$

Wide1$Wide2$True Signal$

・

RGB mode

$

Normal$Wide$Zoom$

* Depending on the type of signal, some aspects may 

not be selected.

* When the Wide function is used to select the Zoom1 

or Zoom2 mode, it may not be possible to display part 
of the menu screen.

• When the WIDE mode is set to “Normal”, and pictures are shown for an extended time, a residual image or “burn-in” may be created. The burn-in 

may occur at the boundary where the left and right borders of the picture meet the vertical bars. To reduce the chance of  “burn-in” when watching in 
the “Normal”, we recommend you set the “Background” to “Light Gray.” (See P. E-37.)

• When a residual image was created, it is reduced by using the “White screen” settings. Note that there may also be cases when it can not be recovered 

completely. (See P. E-37.)

• A variety of Screen Sizes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame 

height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same 
aspect ratio.

• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making 

purposes or for a public audience may constitute a copyright infringement.

• In order to avoid copyright infringement, select a mode having the same aspect ratio as the original picture. 

Wide1 mode

7701_01_E.book  23 ページ  ２００７年３月２２日　木曜日　午後２時３８分