Fujitsu 4312 FA ユーザーズマニュアル

Colour monitor 4312 FA

S26361-K841-V150-1-5E19

English - 21

Ê 

Check whether the system unit is switched on.

Ê 

Check whether the data cable for the monitor is correctly attached to the monitor and the
monitor port on the system unit.

Ê 

Press any key on the PC keyboard - the PC may be in energy saving mode.

Ê 

Alter the brightness and/or contrast until you get a picture.

Ê 

First in the 

 setting window, set the 

 function to remove any vertical bars.

Ê 

Then set the 

 function in the 

 setting window to eliminate the picture noise or the

horizontal lines.

If one of the operating systems Windows for Workgroups, Windows 95/98, Windows NT
or OS/2 (with Windows emulation installed) is used, the monitor can be adjusted with the
floppy disk supplied.

The standard of production techniques today cannot guarantee an absolutely fault-free screen
display. A few isolated constant lit or unlit pixels may be present. The maximum permitted number
of pixels faults is stipulated in the stringent international standard ISO 13406-2 (Class II).

Example: a 17" flat-screen monitor with a resolution of 1024 x 1280 has 1024 x 1280 = 1310720
pixels. Each pixel consists of three subpixels (red, green and blue), so there are about 4 million dots
in total.
According to ISO 13406-2 (Class II), a maximum of 6 pixels and 7 subpixels may be defective, i. e.
a total of 25 faulted dots. This corresponds to approx. 0,00062 % of the entire screen surface!

The flat screen monitors from Fujitsu Siemens Computers are typically considerably better than
requirements defined in this standard.

The background lighting has a limited lifetime. If your monitor display should become too dark, the
background lighting will have to be exchanged. Please contact our customer service centre.