Motorola PrPMC800/800ET Processor PMC Module ユーザーズマニュアル
1 Preparation and Installation
PrPMC800/800ET Processor PMC Module Installation and Use (PrPMC800A/IH5)
3
Overview of Start-Up Procedures
The following table lists the things you need to do before you can use this board and tells where
to find the information you need to perform each step. Be sure to read this entire chapter,
including all Cautions and Warnings, before you begin.
to find the information you need to perform each step. Be sure to read this entire chapter,
including all Cautions and Warnings, before you begin.
Table 1-3. Start-Up Overview
What you need to do ...
Refer to ...
On page
...
...
Unpack the hardware.
Unpacking the PrPMC800/800ET
Hardware
Hardware
Make any settings or
adjustments on the
PrPMC800/800ET module.
adjustments on the
PrPMC800/800ET module.
Preparing the PrPMC800/800ET Hardware
PrPMC800/800ET Configuration
Considerations
Considerations
Prepare any other optional
devices or equipment you will
be using.
devices or equipment you will
be using.
For more information on optional devices
and equipment, refer to the documentation
provided with that equipment.
and equipment, refer to the documentation
provided with that equipment.
Install the PrPMC800/800ET on
the baseboard.
the baseboard.
Installation of a PrPMC800/800ET on a
VME or CompactPCI board
VME or CompactPCI board
Connect any other optional
devices or equipment you will
be using.
devices or equipment you will
be using.
Connector Pin Assignments
For more information on optional devices
and equipment, refer to the documentation
provided with that equipment.
and equipment, refer to the documentation
provided with that equipment.
Power up the system.
Status Indicators
You may also wish to obtain the PPCBug
Diagnostics Manual, listed in Appendix C,
Related Documentation.
Diagnostics Manual, listed in Appendix C,
Related Documentation.
Examine the environmental
parameters and make any
changes needed.
parameters and make any
changes needed.
ENV - Set Environment
You may also wish to obtain the PPCBug
Firmware Package User’s Manual, listed in
Appendix C, Related Documentation.
Firmware Package User’s Manual, listed in
Appendix C, Related Documentation.
Program the PrPMC800/800ET
module and PMCs as needed
for your applications.
module and PMCs as needed
for your applications.
Preparing the PrPMC800/800ET Hardware
You may also wish to obtain the
PrPMC800/800ET Processor PMC Module
Programmer’s Reference Guide, listed in
Appendix C, Related Documentation.
PrPMC800/800ET Processor PMC Module
Programmer’s Reference Guide, listed in
Appendix C, Related Documentation.