Video Products RJ45-5EWTP-QR-PCB プリント

 

 
 

The Weatherproof Cable Shield is a water-tight cable restraint to be applied to  
shielded Cat5/5e/6/6a cable to make a weatherproof cable connection to outdoor enclosures.  
To make sure the connection is waterproof upon completion, follow the steps below.   

 
 
 

1. Insert the seal ring into the housing. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

2. Strip the CATx shielded cable jacket (6mm-7mm O.D.) approximately ½” and insert the cable through the 
sealing nut, screw nut, and housing.  (Note: Heat shrink tubing can be applied to cable to increase the O.D. to  
6mm-7mm.) 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

3. Terminate the CATx shielded cable with an RJ45 connector.  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

housing  

screw nut 

sealing nut 

strip approx. ½”   

CATx cable 

VPI

VIDEO
PRODUCTS
INCORPORATED