Black Box IC1000A ユーザーズマニュアル

If you haven’t already done so, follow the hardware-
installation instructions in Section 3.1. When that’s
finished, your new communication ports, numbered
sequentially following the existing ports in your system,
are ready. (Note that because Windows NT 4.0 is not
Plug-and-Play, you will not see a pop-up dialog box
indicating that new hardware has been found. You may
verify correct installation with the Edgeport Utility or
USB Status Utility. See Sections 4.2.2 and 4.3 for more
information.)

To install the USB Director RS-232 drivers in
Windows 2000:

1. Insert the Black Box driver CD in your CD-ROM

drive.

2. If you haven’t already done so, follow the

hardware-installation instructions in Section 3.1.

3. After you connect the USB cable, the Found New

Hardware Wizard should appear. Click “Next.”

4. Select “Search for a suitable driver for my device”

and click “Next.”