IBM 2251 ユーザーズマニュアル
POST Error Code
FRU/Action
111
I/O channel parity error
I/O channel parity error
1.
Reseat adapters
2.
Any adapter
3.
Riser card
4.
System Board
114
Adapter ROM error
Adapter ROM error
1.
Adapter Memory
2.
System Board
3.
Riser card
129
Internal cache test error
Internal cache test error
1.
Processor
2.
L2 Cache Memory
3.
System Board
151
Real-time clock failure
Real-time clock failure
1.
System Board
161
Bad CMOS battery
Bad CMOS battery
1.
Run Setup
2.
CMOS Backup Battery (see “Safety
Information” on page 128)
Information” on page 128)
3.
System Board
162
Configuration mismatch
Configuration mismatch
1.
Run Setup and verify Configuration
2.
Had a device been added, removed,
changed location? If not, suspect that
device.
changed location? If not, suspect that
device.
3.
Power-on external devices first, then
power-on computer
power-on computer
4.
CMOS Backup Battery (see “Safety
Information” on page 128)
System Board
Information” on page 128)
System Board
5.
System Board
6.
Riser card
162
And unable to run diagnostics
And unable to run diagnostics
1.
Diskette Drive
2.
System Board
3.
Diskette Drive Cable
4.
Riser card
163
Clock not updating or invalid time set
Clock not updating or invalid time set
1.
Time and Date Set?
2.
CMOS Backup Battery (see “Safety
Information” on page 128)
Information” on page 128)
3.
System Board
164
POST detected a base memory or extended
memory size mismatch error or RIMM
socket 3 is populated with a RIMM memory
module
POST detected a base memory or extended
memory size mismatch error or RIMM
socket 3 is populated with a RIMM memory
module
1.
2.
Run the Extended Memory Diagnostic
tests
tests
166
Boot Block Check Sum Error
Boot Block Check Sum Error
1.
Run Flash Recovery using Boot Block.
See “Flash recovery boot block jumper”
on page 98.
See “Flash recovery boot block jumper”
on page 98.
2.
System Board
64
Hardware Maintenance Manual