Siemens PCS7 ユーザーズマニュアル
Product Information
PCS7/TM V2.02
24.10.2001
Siemens AG 2001
11 of 21
3.7 Necessary TM Licenses (Authorization)
Authorizations are installed in the <LW>:AX NF ZZ directory.
Depending on the employed channel, the following authorization must be stored there:
TELEPERM M channel DLL CS 275/ L2:
•
•
AS 23x, AS 488, AS 215, AG 150U
AG 155U only
AG 155U only
A7TMCS50
•
AS 220 only
A7T2CS50
•
AS 220 and AS 23x, AS488, AS 215,
AG 150U, AG 155U
AG 150U, AG 155U
A7TACS50
This authorization must be installed in all computers that communicate with an AS.
If the installed channel and the authorization are not compatible with each other, a box appears during
runtime that states this incompatibility. The License.log file in the <LW>:\Siemens\WinCC\Diagnose
directory tells you which license is required for the installed channel.
runtime that states this incompatibility. The License.log file in the <LW>:\Siemens\WinCC\Diagnose
directory tells you which license is required for the installed channel.
Image blocks PCS7/TM-OCX:
•
•
The authorization A7TMFP50 is uniformly required for all image blocks.
It must be installed on each PC where operator input and visualization is required
It must be installed on each PC where operator input and visualization is required
3.7.1
Upgrade from WinCC/TM, V1.0x, to PCS7/TM, V2.0x
For this upgrade we offer the Upgrade package V2.0.
Changing from PCS7/TM, V2.00 to V2.01, or V2.01 to V2.02 the TM licences are not affected.
Changing from PCS7/TM, V2.00 to V2.01, or V2.01 to V2.02 the TM licences are not affected.
Important note:
Upon the migration from version V1.0x ... V1.05 to version V2.0 you will irrevocably lose the authorization for the
previous version.
previous version.
We recommend to perform the migration of the authorization prior to the installation of PCS7/TM. The migration
requires the following preconditions to be fulfilled:
requires the following preconditions to be fulfilled:
•
You possess a single license or a copy license for WinCC/TM; V1.0x on an authorization floppy disk or in
your computer.
your computer.
•
You have purchased an upgrade license to PCS7/TM V2.0 (referred to as "authorization upgrade" in the text
below).
below).
To upgrade the software from version V1.0x, use the following procedure:
1. The "old authorization" must be on the associated "old authorization floppy disk”. If necessary, you must first
1. The "old authorization" must be on the associated "old authorization floppy disk”. If necessary, you must first
transfer this authorization from your computer onto the "old authorization floppy disk".
2. Insert the "authorization floppy disk - upgrade” and invoke the "AuthorsW" program via the start bar under
Simatic > AuthorsW. If "AuthorsW" has not been installed in your computer, you must carry out the installa-
tion from the CD ("Setup.exe" in the Authors / Disk 1 directory). The "Extras" menu contains a menu item
"Upgrading guideline”. This guideline can support you during upgrading.
tion from the CD ("Setup.exe" in the Authors / Disk 1 directory). The "Extras" menu contains a menu item
"Upgrading guideline”. This guideline can support you during upgrading.
3. Select the "Authorization management" tab. Select the menu item "Upgrading..." from the "Authorization”
menu.
4. Select the upgrade program from the dialog that is opened subsequently. You will then be prompted to insert
the authorization floppy disk of the old authorization (V1.0x). Please follow the instructions on the screen and
insert the "Authorization floppy disk - upgrade" when you are prompted to do so.
insert the "Authorization floppy disk - upgrade" when you are prompted to do so.
5. Upgrading will be terminated when the new authorization V2.0 is activated on the "Authorization floppy disk -
upgrade".
6.
The new authorization can now be transferred to your computer during the setup or using "AuthorsW”.