Freescale Semiconductor MPC5200B ユーザーズマニュアル

CDM Registers

MPC5200B Users Guide, Rev. 1

Freescale Semiconductor

5-15

NOTE

The clock ratio should only be changed if no module, which is clocked by the IPB and/or PCI clock,
is currently running. Suggestion is to change the clock ratio during the boot time only.

5.5.5

CDM 48MHz Fractional Divider Configuration Register—MBAR + 0x0210

The CDM 48MHz Fractional Divider Configuration Register contains the control bits used in the 48MHz fractional divider.

Bit

Name

Description

0–6

—

Reserved for future use. Write 0.

ddr_mode

SDRAM Controller DDR memory mode, read-only.

bit=0:SDRAM Controller configured for SDR SDRAM (single data rate)

bit=1:SDRAM Controller configured for DDR SDRAM (double data rate)

This register location is a read-only status bit; write 0. The controlling register is in the
SDRAM Controller register map. In the CDM this bit determines the frequency and phase
of memory read clock.

8–14

—

Reserved for future use. Write 0.

xlb_clk_sel

XLB Clock Frequency

bit=0:XLB CLK = f

system

bit=1:XLB CLK = f

system

This register location is a read-only status bit. The controlling register is the POR
Configuration register - cdm configuration register [26].

16–22

—

Reserved for future use. Write 0.

ipb_clk_sel

IPB Clock Select

bit=0:IPB CLK = XLB_CLK

bit=1:IPB CLK = XLB_CLK/2

24–29

—

Reserved for future use. Write 0.

30-31

pci_clk_sel

PCI Clock Select

00–PCI_CLK = IPB_CLK

01–PCI_CLK = IPB_CLK/2

10–PCI_CLK = XLB_CLK/4