Freescale Semiconductor MPC5200B ユーザーズマニュアル

Freescale Semiconductor

20-1

The BDLC module is a serial communication module which allows the user to send and receive messages across a Society of Automotive 
Engineers (SAE) J1850 serial communication network

.

 The user’s software handles each transmitted or received message on a byte-by-byte 

basis, while the BDLC performs all of the network access, arbitration, message framing and error detection duties.

It is recommended that the reader be familiar with the operation and requirements of the SAE J1850 protocol as described in the document 
“SAE Standard J1850 Class B Data Communications Network Interface” prior to proceeding with this specification.

The BDLC module is designed in a modular structure for use as an IP block. A general working knowledge of the IP bus signals and bus 
control is assumed in the writing of this document.

Features of the BDLC module include the following: 

•

SAE J1850 Class B Data Communications Network Interface Compatible and ISO Compatible for Low-Speed (

≤ 

125 Kbps) Serial 

Data Communications in Automotive Applications

•

10.4 Kbps Variable Pulse Width (VPW) Bit Format

•

Digital Noise Filter

•

Digital Loopback Mode

•

4X Receive and Transmit Mode, 41.6 Kbps, Supported

•

BREAK symbol generation Supported

•

Block Mode Receive and Transmit Supported

•

Collision Detection

•

Hardware Cyclical Redundancy Check (CRC) Generation and Checking

•

Dedicated Register for Symbol Timing Adjustments 

•

IP bus Interface

•

In-Frame Response (IFR) Types 0, 1, 2, and 3 Supported

•

Polling and CPU Interrupt Generation with Vector Lookup Available

The BDLC module has 6 main modes of operation which interact with the power supplies, pins, and the rest of the MCU as shown below.