Fujitsu D1321 ユーザーズマニュアル

Features

6 - English

A26361-D1321-Z120-1-7419

An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for
the ultra ATA/66or ultra ATA/100 mode.

Ê 

Connect the end of the cable marked with blue to the system board.

This system board has an optional Intel 82550ET LAN controller which supports transfer speeds of
10 Mbit/s and 100 Mbit/s. The LAN controller is equipped with a 3 KB transmission and receiving
buffer (FIFO) and supports WOL function through Magic Packet

ä

.

It is also possible to boot a device without its own boot hard disk via LAN.  Here Bootix LAN BootP
and Intel PXE are supported.

The LAN RJ45 connector is equipped with a yellow and a green LED (light emitting diode).

1

2

1 =  Yellow indicator
2 =  Green indicator

Yellow

a connection exists (e.g. to a hub).

Green

Link Mode:

the LAN connection is active.

WOL mode:

a Magic Packet

TM 

is being received.

The following table shows which PCI bus interrupts are assigned on the system board.

PCI bus interrupt

Component on system board:

B, C, D, A

PCI bus slot 1

C, D, A, B

PCI bus slot 2

D, A, B, C

PCI bus slot 3

A, B

AGP slot

D

First USB controller

H

Second USB controller

E

LAN controller

B

SMBus

B

AC'97 Audio