Fujitsu B23Q8YA-G-02-E ユーザーズマニュアル

 

 

 

   

1 

This chapter describes the post-installation notes. 

Only the modifications (patches, PTF, Program Local Fix, etc.) for PRIMEPOWER provided by FUJITSU 

LIMITED can be applied to existing PRIMEPOWER systems running Solaris OS software. 

Do not use patches provided by Sun Microsystems, Inc. on the World Wide Web or those provided by other 

vendors. Also be careful that you do not apply modifications (patches, PTF, Program Local Fix, etc.) 

intended for other systems (GP7000D, etc.) provided by FUJITSU LIMITED. 

For information on Solaris OS modifications, contact a FUJITSU systems engineer. 

Use the date command in single user mode if you need to change the date and time for testing purposes. 

 

See "System Console Software User's Guide" for information on how to change the date and time. 

z  All serial ports on the system board are to be used for the System Management Console. 
z  Do not access the following devices relating to serial ports. Also do not change the setting of 

applications using the following device files (such as a port monitor). 

- 

/dev/term/a, b, ... 

- 

/dev/cua/a, b, ... 

- 

/dev/term/fa000, fa001, ... 

- 

/dev/cua/fa000, fa001, ... 

- 

/dev/se_hdlc 

- 

/dev/se_hdlc0, /dev/se_hdlc1, ... 

However, devices that are not used as the console path may be used, but only for the FJVTS and 

SunVTS. The usable default devices for FJVTS and SunVTS are /dev/term/fa003, fa004, ... and 

/dev/se_hdlc3, se_hdlc4, ... 

z  The device name of the serial port will be as follows: