Adaptec 1225SA ユーザーズマニュアル
Chapter 6: Creating a Bootable Array
l 40
3
Review the license information, then press Enter.
The Main Menu opens.
4
Click Launch Configuration Utility.
Adaptec Storage Manager opens.
5
Click Create.
The Configuration wizard opens.
6
Select Express configuration..., then click Next.
7
Review the information that is displayed.
Note:
Adaptec Storage Manager uses the term logical drives when referring to arrays.
In this example, Adaptec Storage Manager has used two equal-sized disk drives to
automatically create one logical drive with RAID 1.
automatically create one logical drive with RAID 1.
To specify a size for the logical drives, or to make other changes to the configuration, click
Modify logical devices.
Modify logical devices.
8
Click Apply, then click Yes when prompted to confirm applying your new configuration.
Adaptec Storage Manager builds the logical drive(s).
The configuration is saved on the Adaptec controller (as an “array” ) and on the physical
disk drives.
disk drives.
9
Partition and format your logical drive.
The logical drive you created appears as a physical disk drive on your operating system.
You must partition and format these logical drives before you can use them to store data.
You must partition and format these logical drives before you can use them to store data.
10
Close all windows, then click Reboot to restart your system.
11
Remove the HostRAID Installation CD.
For information on installing and using Adaptec Storage Manager as a full software
application, refer to the Adaptec Storage Manager User’s Guide provided on the Adaptec
Storage Manager CD.
application, refer to the Adaptec Storage Manager User’s Guide provided on the Adaptec
Storage Manager CD.
12
Continue with
(next section).
Making Your Array Bootable
).
Continue with