AMCC 9000 ユーザーズマニュアル
Installing the 3ware Driver and Windows on a New Unit
www.3ware.com
55
3
In the 3ware Driver & Firmware Images menu, click the
appropriate button to create the driver diskette that you need.
appropriate button to create the driver diskette that you need.
Note that there are both 32-bit and 64-bit AMD drivers
available for Windows. Be sure to select the correct one.
available for Windows. Be sure to select the correct one.
4
When the confirm message appears, insert a blank diskette into
a floppy drive and click the Yes button to begin the process.
a floppy drive and click the Yes button to begin the process.
Installing the 3ware Driver and
Windows on a New Unit
If you want to install Windows on a new drive configuration
managed by the 3ware RAID controller, follow the instructions in
this section.
managed by the 3ware RAID controller, follow the instructions in
this section.
If Windows is already installed on another drive, turn to “Installing
the Driver on a System that Boots from a Different Device” on
page 56.
the Driver on a System that Boots from a Different Device” on
page 56.
To install Windows and the 3ware driver
1
Boot from the Windows 2000, Windows XP, or Windows
Server 2003 CD and press F6 when you see the message:
“Press F6 if you need to install a 3rd party SCSI or RAID
driver” at the bottom of the display.
Server 2003 CD and press F6 when you see the message:
“Press F6 if you need to install a 3rd party SCSI or RAID
driver” at the bottom of the display.
2
When you see the message: “Setup could not determine the
type of one or more mass storage devices or you have chosen to
manually specify an adapter…”
type of one or more mass storage devices or you have chosen to
manually specify an adapter…”
Type S to specify that you have an additional 3ware RAID
controller.
controller.
3
Insert the 3ware driver diskette and press Enter.
4
When a box with AMCC 3ware Series ATA RAID Controller
appears, press Enter to select it.
appears, press Enter to select it.