HP (Hewlett-Packard) ZR22W ユーザーズマニュアル
Routing and Connecting the Cables
1.
Place the monitor in a convenient, well-ventilated location near the computer.
2.
Remove the cable routing cover by pulling it straight off the front of the column.
Figure 3-3
Removing the Cable Routing Cover
3.
Before connecting the cables, route them through the cable routing hole in the column (1) and
replace the cable routing cover (2).
replace the cable routing cover (2).
Figure 3-4
Routing Cables
4.
Connect a VGA signal cable, DVI-D signal cable, or DisplayPort signal cable.
ENWW
Routing and Connecting the Cables
7