HP (Hewlett-Packard) HP LP2465 24" ユーザーズマニュアル

1. Remove the monitor pedestal base. Refer to “Removing the 

Monitor Pedestal” steps in the previous section. 

Ä

CAUTION: This monitor supports the VESA industry standard 
100mm mounting holes. To attach a third party mounting solution to 
the monitor, four 4mm, 0.7 pitch, and 10mm long screws are 
required (not provided with the monitor). Longer screws should not be 
used because they may damage the monitor. It is important to verify 
that the manufacturer’s mounting solution is compliant with the VESA 
standard and is rated to support the weight of the monitor display 
panel. For best performance, it is important to use the power and 
video cable provided with the monitor. 

2. Remove the Quick Release from the pedestal base by 

removing the four screws.