ZyXEL Communications 91-009-073003B ユーザーズマニュアル
Chapter 7 Tutorials
ZyWALL USG 50 User’s Guide
111
Click Configuration > Network > Interface > Ethernet and double-click the
wan1 interface’s entry. Select Use Fixed IP Address and configure the IP
address, subnet mask, and default gateway settings and click OK.
wan1 interface’s entry. Select Use Fixed IP Address and configure the IP
address, subnet mask, and default gateway settings and click OK.
Figure 56 Configuration > Network > Interface > Ethernet > Edit wan1
7.1.2 Configure Port Roles
Here is how to convert port P5 from the lan2 interface and add it to the dmz
interface.
interface.
1
Click Configuration > Network > Interface > Role.
2
Under P5 select the dmz (DMZ) radio button and click Apply.
Figure 57 Configuration > Network > Interface > Port Roles Example
7.1.3 Configure the DMZ Interface for a Local Network
Here is how to set the dmz interface (created in the previous section) for a
separate local network. It uses 192.168.4.1 as its IP address and has a DHCP
server to distribute IP addresses to connected DHCP clients.
separate local network. It uses 192.168.4.1 as its IP address and has a DHCP
server to distribute IP addresses to connected DHCP clients.