ZyXEL Communications 91-009-073003B ユーザーズマニュアル
Chapter 11 Interfaces
ZyWALL USG 50 User’s Guide
232
11.4.1 PPP Interface Summary
This screen lists every PPPoE/PPTP interface. To access this screen, click
Configuration > Network > Interface > PPP.
Configuration > Network > Interface > PPP.
Configuration > Network > Interface > PPP
Each field is described in the table
below.
Table 57 Configuration > Network > Interface > PPP
LABEL
DESCRIPTION
User
Configuration /
System Default
Configuration /
System Default
The ZyWALL comes with the (non-removable) System Default PPP
interfaces pre-configured. You can create (and delete) User
Configuration PPP interfaces.
interfaces pre-configured. You can create (and delete) User
Configuration PPP interfaces.
Add
Click this to create a new user-configured PPP interface.
Edit
Double-click an entry or select it and click Edit to open a screen
where you can modify the entry’s settings.
where you can modify the entry’s settings.
Remove
To remove a user-configured PPP interface, select it and click
Remove. The ZyWALL confirms you want to remove it before doing
so.
Remove. The ZyWALL confirms you want to remove it before doing
so.
Activate
To turn on an entry, select it and click Activate.
Inactivate
To turn off an entry, select it and click Inactivate.
Connect
To connect an interface, select it and click Connect. You might use
this in testing the interface or to manually establish the connection for
a Dial-on-Demand PPPoE/PPTP interface.
this in testing the interface or to manually establish the connection for
a Dial-on-Demand PPPoE/PPTP interface.
Disconnect
To disconnect an interface, select it and click Disconnect. You might
use this in testing the interface.
use this in testing the interface.
Object References Select an entry and click Object References to open a screen that
shows which settings use the entry. See
for an example.
#
This field is a sequential value, and it is not associated with any
interface.
interface.