ZyXEL Communications 91-009-073003B ユーザーズマニュアル
Chapter 1 Introducing the ZyWALL
ZyWALL USG 50 User’s Guide
32
1.2 Rack-mounted Installation
The ZyWALL can be mounted on an EIA standard size, 19-inch rack or in a wiring
closet with other equipment. Follow the steps below to mount your ZyWALL on a
standard EIA rack using a rack-mounting kit. Make sure the rack will safely
support the combined weight of all the equipment it contains and that the position
of the ZyWALL does not make the rack unstable or top-heavy. Take all necessary
precautions to anchor the rack securely before installing the unit.
closet with other equipment. Follow the steps below to mount your ZyWALL on a
standard EIA rack using a rack-mounting kit. Make sure the rack will safely
support the combined weight of all the equipment it contains and that the position
of the ZyWALL does not make the rack unstable or top-heavy. Take all necessary
precautions to anchor the rack securely before installing the unit.
Note: Leave 10 cm of clearance at the sides and 20 cm in the rear.
Use a #2 Phillips screwdriver to install the screws.
Note: Failure to use the proper screws may damage the unit.
1.2.1 Rack-Mounted Installation Procedure
1
Align one bracket with the holes on one side of the ZyWALL and secure it with the
included bracket screws (smaller than the rack-mounting screws).
included bracket screws (smaller than the rack-mounting screws).
2
Attach the other bracket in a similar fashion.
Figure 1 Attaching Mounting Brackets and Screws