ZyXEL Communications 91-009-073003B ユーザーズマニュアル
Chapter 20 IP/MAC Binding
ZyWALL USG 50 User’s Guide
344
20.1.2 What You Need to Know
DHCP
IP/MAC address bindings are based on the ZyWALL’s dynamic and static DHCP
entries.
entries.
Interfaces Used With IP/MAC Binding
IP/MAC address bindings are grouped by interface. You can use IP/MAC binding
with Ethernet, bridge, VLAN interfaces. You can also enable or disable IP/MAC
binding and logging in an interface’s configuration screen.
with Ethernet, bridge, VLAN interfaces. You can also enable or disable IP/MAC
binding and logging in an interface’s configuration screen.
20.2 IP/MAC Binding Summary
Click Configuration > Network > IP/MAC Binding to open the IP/MAC
Binding Summary screen. This screen lists the total number of IP to MAC
address bindings for devices connected to each supported interface.
Binding Summary screen. This screen lists the total number of IP to MAC
address bindings for devices connected to each supported interface.
Figure 206 Configuration > Network > IP/MAC Binding > Summary
The following table describes the labels in this screen.
Table 97 Configuration > Network > IP/MAC Binding > Summary
LABEL
DESCRIPTION
Edit
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry’s settings.
you can modify the entry’s settings.
Activate
To turn on an entry, select it and click Activate.
Inactivate
To turn off an entry, select it and click Inactivate.
#
This field is a sequential value, and it is not associated with a specific
entry.
entry.