ZyXEL Communications 91-009-073003B ユーザーズマニュアル

Chapter 31 ADP

ZyWALL USG 50 User’s Guide

Use this screen to:

• Create a new profile using an existing base profile
• Edit an existing profile
• Delete an existing profile

Status

The activate (light bulb) icon is lit when the entry is active and 
dimmed when the entry is inactive.

From, To

This is the direction of travel of packets to which an anomaly profile 
is bound. Traffic direction is defined by the zone the traffic is coming 
from and the zone the traffic is going to.

Use the From field to specify the zone from which the traffic is 
coming. Select ZyWALL to specify traffic coming from the ZyWALL 
itself. 

Use the To field to specify the zone to which the traffic is going. 
Select ZyWALL to specify traffic destined for the ZyWALL itself.

From LAN1 To LAN1 means packets traveling from a computer on 
one LAN1 subnet to a computer on another LAN1 subnet via the 
ZyWALL’s LAN1 zone interfaces. The ZyWALL does not check packets 
traveling from a LAN1 computer to another LAN1 computer on the 
same subnet.

From WAN To WAN means packets that come in from the WAN 
zone and the ZyWALL routes back out through the WAN zone.

Note: Depending on your network topology and traffic load, 

applying every packet direction to an anomaly profile may 
affect the ZyWALL’s performance.

Anomaly Profile An anomaly profile is a set of anomaly rules with configured 

activation, log and action settings. This field shows which anomaly 
profile is bound to which traffic direction. Select an ADP profile to 
apply to the entry’s traffic direction. Configure the ADP profiles in the 
ADP profile screens. 

Apply 

Click Apply to save your changes. 

Reset

Click Reset to return the screen to its last-saved settings.  

Table 153   Configuration > Anti-X > ADP > General  (continued)