ZyXEL Communications 91-009-073003B ユーザーズマニュアル
Chapter 36 Addresses
ZyWALL USG 50 User’s Guide
601
36.2.1 Address Add/Edit Screen
The Configuration > Address Add/Edit screen allows you to create a new
address or edit an existing one. To access this screen, go to the Address screen
(see
address or edit an existing one. To access this screen, go to the Address screen
(see
), and click either the Add icon or an Edit icon.
Figure 344 Configuration > Object > Address > Address > Edit
The following table describes the labels in this screen.
Table 180 Configuration > Object > Address > Address > Edit
LABEL
DESCRIPTION
Name
Type the name used to refer to the address. You may use 1-31
alphanumeric characters, underscores(
alphanumeric characters, underscores(
_
), or dashes (-), but the first
character cannot be a number. This value is case-sensitive.
Address Type
Select the type of address you want to create. Choices are: HOST,
RANGE, SUBNET, INTERFACE IP, INTERFACE SUBNET, and
INTERFACE GATEWAY.
RANGE, SUBNET, INTERFACE IP, INTERFACE SUBNET, and
INTERFACE GATEWAY.
Note: The ZyWALL automatically updates address objects that are
based on an interface’s IP address, subnet, or gateway if the
interface’s IP address settings change. For example, if you
change ge1’s IP address, the ZyWALL automatically updates
the corresponding interface-based, LAN subnet address
object.
interface’s IP address settings change. For example, if you
change ge1’s IP address, the ZyWALL automatically updates
the corresponding interface-based, LAN subnet address
object.
IP Address
This field is only available if the Address Type is HOST. This field
cannot be blank. Enter the IP address that this address object
represents.
cannot be blank. Enter the IP address that this address object
represents.
Starting IP
Address
Address
This field is only available if the Address Type is RANGE. This field
cannot be blank. Enter the beginning of the range of IP addresses that
this address object represents.
cannot be blank. Enter the beginning of the range of IP addresses that
this address object represents.
Ending IP
Address
Address
This field is only available if the Address Type is RANGE. This field
cannot be blank. Enter the end of the range of IP address that this
address object represents.
cannot be blank. Enter the end of the range of IP address that this
address object represents.
Network
This field is only available if the Address Type is SUBNET, in which case
this field cannot be blank. Enter the IP address of the network that this
address object represents.
this field cannot be blank. Enter the IP address of the network that this
address object represents.
Netmask
This field is only available if the Address Type is SUBNET, in which case
this field cannot be blank. Enter the subnet mask of the network that
this address object represents. Use dotted decimal format.
this field cannot be blank. Enter the subnet mask of the network that
this address object represents. Use dotted decimal format.