ZyXEL Communications 91-009-073003B ユーザーズマニュアル
Chapter 6 Configuration Basics
ZyWALL USG 50 User’s Guide
88
change an Ethernet interface’s IP address, the ZyWALL automatically updates the
rules or settings that use the interface-based, LAN subnet address object.
rules or settings that use the interface-based, LAN subnet address object.
You can use the Configuration > Objects screens to create objects before you
configure features that use them. If you are in a screen that uses objects, you can
also usually select Create new Object to be able to configure a new object. For a
list of common objects, see
configure features that use them. If you are in a screen that uses objects, you can
also usually select Create new Object to be able to configure a new object. For a
list of common objects, see
.
Use the Object Reference screen (
) to see what
objects are configured and which configuration settings reference specific objects.
6.2 Zones, Interfaces, and Physical Ports
Zones (groups of interfaces and VPN tunnels) simplify security settings. Here is an
overview of zones, interfaces, and physical ports in the ZyWALL.
overview of zones, interfaces, and physical ports in the ZyWALL.
Figure 52 Zones, Interfaces, and Physical Ethernet Ports
Table 13 Zones, Interfaces, and Physical Ethernet Ports
Zones
(WAN,LAN, DMZ)
A zone is a group of interfaces and VPN tunnels. Use zones to apply
security settings such as firewall, IDP, remote management, anti-
virus, and application patrol.
security settings such as firewall, IDP, remote management, anti-
virus, and application patrol.
Interfaces
(Ethernet,
VLAN,...)
VLAN,...)
Interfaces are logical entities that (layer-3) packets pass through.
Use interfaces in configuring VPN, zones, trunks, DDNS, policy
routes, static routes, HTTP redirect, and NAT.
Use interfaces in configuring VPN, zones, trunks, DDNS, policy
routes, static routes, HTTP redirect, and NAT.
Port roles combine physical ports into interfaces.
Physical
Ethernet Ports
Ethernet Ports
(P1, P2, ...)
The physical port is where you connect a cable. In configuration, you
use physical ports when configuring port groups. You use interfaces
and zones in configuring other features.
use physical ports when configuring port groups. You use interfaces
and zones in configuring other features.
Physical Ports
Interfaces
Zones
LAN1
DMZ
lan1
dmz
LAN2
lan2
WAN
wan1 wan2