HP (Hewlett-Packard) HP vs15 ユーザーズマニュアル

■ Connect the DVI-D video cable (sold separately) to the 

f monitor (select models only) and to the video connector on 
the rear panel of the computer. (The DVI-D connector on the 
f monitor is for digital-to-digital connection only. Your computer 
must have a DVI-compatible graphics card installed for use 
with this cable.)
❏ Connect one end of the DVI-D cable to the DVI-D input 

connector on the monitor 2.

❏ Then, connect the other end of the cable to the DVI 

connector on the computer.

To enable the speakers, connect the audio cable to the line out 
connector on the computer according to your monitor type.

1. Connect one end of the audio cable to the computer audio line 

out connector and connect the other end to the monitor audio 
connector 3 (see the previous illustration “Connecting cables 
on the vs monitor”).

2. As needed, connect headphones to the headphone jack 

connector on the vs monitor. (The headphones connector is 
item 

 in the illustration “Front panel buttons on the vs monitor” 

in the next chapter.)

1. Place the f monitor speaker set so that the speaker with the 

controls 8, as shown in the figure that follows, is on the right 
side when you view the f monitor from the front.

2. Insert the green plug on the end of the right speaker audio 

cable 3 into the computer audio line out connector.