Xerox 7335 ユーザーズマニュアル
![Xerox](https://files.manualsbrain.com/attachments/0fe48d1f322308ffbf3238e7957ca0f7e8effce1/common/fit/150/50/5364c62dbb9b24e511428c3c1ad3cb3313d9aff7b5c826e56a00b9e021df/brand_logo.png)
137
Installation Procedure
This section describes the configuration procedure to use the Scan to PC (FTP/SMB) feature on the
machine.
machine.
The following two steps are necessary to use the Scan to PC (FTP/SMB) feature.
•
Enabling the required ports and Setting TCP/IP
Enable the FTP port and SMB port on the Device, and then set the machine’s IP address. If you will
be using SMB on a Microsoft Network, make sure to enable either DNS or WINS as part of the TCP/IP
configuration. For FTP, make sure that DNS is enabled.
be using SMB on a Microsoft Network, make sure to enable either DNS or WINS as part of the TCP/IP
configuration. For FTP, make sure that DNS is enabled.
•
Preparing an FTP directory or SMB shared folder on the receiving computer (server or workstation).
Create an FTP directory or SMB shared folder to receive scanned documents over the network.