Acu-Rite CNC 3500i ユーザーズマニュアル
204
7 Programming: Canned Cycles, sub-programs
7.
3 Pr
obing Cy
cles
To use the automatic tool preset:
Field
Code
Description
OvrSlwFeed
S
This is the override for the slow feedrate
that was set in the machine setup
parameter ZFirstPickFeedRate_Slow.
This is used for the same reason as the F
cycle parameter. This can only be set
slower. Trying to set this higher will
result in the software using the original
feedrate. (Optional)
that was set in the machine setup
parameter ZFirstPickFeedRate_Slow.
This is used for the same reason as the F
cycle parameter. This can only be set
slower. Trying to set this higher will
result in the software using the original
feedrate. (Optional)
OvrRPM
R
This is the override for the RPM that was
set in the machine setup parameter
calibAndToolMeasurementRPM. This is
used for the same reason as the F cycle
parameter. This can only be set slower.
Trying to set this higher will result in the
software using the original RPM.
(Optional)
set in the machine setup parameter
calibAndToolMeasurementRPM. This is
used for the same reason as the F cycle
parameter. This can only be set slower.
Trying to set this higher will result in the
software using the original RPM.
(Optional)